Valves

HYDRAULIC VALVES

Directional Control Valves
[Top of Page]

Dependable Parker directional control valves are available in a variety of NFPA manifold mounted sizes with solenoid, pilot, manual, and cam actuators. This comprehensive line also offers a wide choice of spools, solenoid voltages, and electrical connections.

• Mounting: Subplate NFPA D03-D10
• Flows: 19-606 LPM (5-160 GPM)
• Pressures: 0-345 Bar (0-5000 PSI)
• Actuators styles include:

- Solenoid
- Hydraulic Pilot
- Pneumatic Pilot
- Lever
- Mechanical Cams

• Wide choice of voltages and connector styles
• Soft shift models eliminate or reduce hydraulic system pressure shock
• Explosion-proof models available

Manapak & Cartpak Sandwich Valves
[Top of Page]

Versatile Manapak and Cartpak valve systems provide a wide variety of hydraulic control functions in compact NFPA D03, D05, and D08 sandwich style valves.

• Mounting: NFPA D03-D08 sandwich style
• Manapak - choice of functions

- Check Valves
- Flow Controls
- Pressure Reducing
- Pressure Relief
- Mechanical Cams

• Maximum pressure: 345 Bar (5000 PSI)
• Cartpak - choice of functions

- Relief
- Pressure Reducing/Relieving
- Load Check
- Back Pressure Check
- Needle
- Flow
- Crossover

• Maximum pressure: 245 Bar (3500 PSI)

Pressure Control Valves
[Top of Page]

A variety of pressure control valves is offered, including pressure reducing, relief, counterbalance, sequence, and unloading functions.

• Available functions include:

- Pressure reducing
- Relief
- Counterbalance
- Sequence
- Unloading

• Inline or manifold mounted
• Sizes 3/4" thru 1 1/4" (19mm-32mm)
• Flows: Up to 342 LPM (90 GPM)
• Pressures: Up to 210 Bar (3000 PSI)

Proportional Control Valves
[Top of Page]

High performance proportional valves featuring integrated "on-board" electronic controls, as well as separate electronic packages. These include high dynamic valves with zero lap servo spools for closed loop applications.

Proportional Direction Valves:

• Mounting: Subplate NFPA D03-D10
• Flows: 0-1325 LPM (0-350 GPM)
• Pressures: 0-345 Bar (0-5000 PSI)

Proportional Throttle Valves:

• Mounting: Inline 3/4" - 1 1/2" (19-38mm)
• Subplate 3/4" - 1 1/2" (19-38mm)
• DIN 24342 Cartridge Inserts 16mm-100mm
• Flows: 8-5678 LPM (2-1500 GPM)
• Pressures: 0-345 Bar (0-5000 PSI)

Proportional Pressure Valves:

• Mounting: Subplate NFPA D03-D10

Inline 3/4" - 1 1/4" (19-32mm)

• DIN 24342 Cartridge Inserts 16mm-63mm
• Flows: 0-2687 LPM (0-710 GPM)
• Pressures: 0-345 Bar (0-5000 PSI)

Electrohydraulic Servo Valves
[Top of Page]

A complete line of industrial servo valves and electronic controls with high frequency response capability and zero lap spools to meet the most demanding applications.

Models BD15/30:

• Maximum Pressure: 210 Bar (300 PSI)
• Flows: 4-151 LPM (1-40 GPM)
• Rugged, reliable, trouble -free operation for industrial motion control applications

Model BD062:

• Maximum Pressure: 315 Bar (4500 PSI)
• Flows: 5-77 LPM (1-20 GPM)
• Provides control of position, velocity and force in motion control applications at an economical price

Model BD760:

• Maximum Pressure: 315 Bar (4500 PSI)
• Flows: 4-90 LPM (1-24 GPM)
• Provides precise control of position, velocity and force in critical motion control applications

Parker DIN 24342 Insert
and Threaded Cartridge Valves
[Top of Page]

DIN insert and threaded cartridge valves provide users with application possibilities throughout a wide range of flow capacities. Cartridge valves provide a multitude of functions and can be used in compact hydraulic systems, know as integrated hydraulic circuits, formed by combining various cartridge valves into a single, machined, ported block.

Parker Treaded Cartridge Valves:

• Industry accepted sizes - 4, 7, 8, 9, 10, 16, and 20
• Flows: Up to 263 LPM (70 GPM)
• Pressures: Up to 210 Bar (3000 PSI)
• Directional Controls

- 2-way, 3-way, 4-way valves
- AC, DC, or manual
- Poppet and spool type

• Complete selection of pressure controls
• Pressure compensated and non-compensated flow controls
• Variety of direct and pilot operated checks
• Cartridge only or single and multi-function inline bodies

DIN 24342 Insert Cartridge Valves:

• Available in sizes 16mm, 25mm, 32mm, 40mm, 50mm, 63mm, 80mm, 100mm
• Flows: Up to 17,000 LPM (4500 GPM)
• Pressures: Up to 350 Bar (5000 PSI)
• Proportional Controls

- Throttles
- Reliefs
- Pressure reducing
- Pressure-compensated flow

• Complete selection of pressure controls
• Variety of direct and pilot operated checks
• Directional controls to 7500 LPM (2000 GPM)

Colorflow Control Valves
[Top of Page]

Engineered for hydraulic applications, these high quality, inline mounted flow, check, needle, metering and pressure-compensated flow control valves are known for their outstanding performance and long life.

• Pressure compensated or non-compensated flow controls
• Sizes: 1/8" thru 2"
• Choice of NPTF, SAE, BSPP, and ISO 6149 metric ports
• Pressures: Up to 350 Bar (500 PSI)
• Flows: Up to 568 LPM (150 GPM)
• Available in brass or steel

ParTrol Control Valves
[Top of Page]

A value-designed product line of hydraulic inline mounted flow, check, and needle valves.

• Sizes: 1/8" thru 1/2" NPTF
• Pressures: Up to 350 Bar (5000 PSI)
• Flows: Up to 95 LPM (11 GPM)
• Available in brass or steel
• Choice of NPT and SAE ports

Republic/Manatrol Valves
and Controls
[Top of Page]

This product offering provides a full range of specialty hydraulic controls designed for a diverse range of applications. The line includes:

• Needle valves
• Check valves
• Plug valves
• Lo-Torq manual directional control valves
• Exectrol high performance directional control valves
• Pressure control valves
• Hand pumps
• Adjustable velocity fuses
• Volume control valves
• Two-way valves

Ball Valves
[Top of Page]

• Models operating at under 600 PSI (41 Bar) up to high pressure valves handling 14,400 PSI (993 Bar)
• Two-way, three-way and four-way styles available
• Broad range of materials includes brass, stainless steel and carbon steel
• Choice of stem and ball material, including stainless steel to inhibit corrosion
• Assortment of port configurations including threaded, manifold mounted, SAE split flange and a unique 4-bolt rotating SAE flange design

Parker Industrial Drives
[Top of Page]

Parker was the first to offer completely packaged, integrated electrohydraulic drives. The Parker Industrial Drive is a complete system - including the actuator, the valve, the feedback device and the motion controller - that can be customized to meet your needs.

Linear Servo Actuators:

• Fully assembled and tested units
• Bore sizes: 2" - 5" (51-127mm) with LDT feedback
• Strokes: Up to 36" (914mm)
• Nominal Pressure: 207 Bar (3000 PSI)
• Mounting: Subplate NFPA D03, D05, or servo

Servo Motors:

• Displacement: 3.6 to 67.3 in./rev.
• Pressure: Up to 207 Bar (3000 PSI)
• Torque: Up to 15,000 in. lbs.

Electronic Controls/Digital Motion Controllers
[Top of Page]

A complete line of electronic controls for proportional and servo valves, including valve drivers, closed loop boards, multiple setpoint ramp boards and signal conditioning cards. For the ultimate in precision, Parker offers digital motion controllers for single or dual axis applications. Control of position and velocity, as well as the acceleration and deceleration of hydraulic actuators can be achieved.

Digital Motion Controllers:

• Easy to program and operate
• Models for industrial and mobile applications

Servo Amplifiers:

• Full PID control, dual loops

Valve Drivers:

• Simplify valve installation and setup
• Provide ramping, setpoints, deadband compensation
• Can be used with variety of Parker proportional valves

Feedback Amplifiers:

• Provide advantages of closed loop control

Power Supplies:

• Available for a variety of valves applications

Joy Stick Controllers:

• Single and dual axis models for mobile applications
• Feature PWM operation for improved performance

PNEUMATIC VALVES

Directional Control Valves
[Top of Page]

A Series Miniature Valves -

The A-mini valves offer a 10mm and 15mm wide package size incorporating all of the features required for medical, semi-conductor and high-tech packaging applications. Valves use a low-watt solenoid (6W) and capture pilot exhaust for clean room applications. Manifolds can use a 25-pin Sub-D collective wiring system.

• 4- way, 2 & 3 position and 3-way, 2 position
• M3, M5 and 1/8" ports
• Body ported and subbase mounted
• Solenoid operated

B Series Valves -

The B Series family of compact, high performance valves utilizes Parker's WCS (Wear Compensation System) to provide wear compensated sealing for non-lube service through million of cycles. Unique manifold systems combine inline valves into flexible, low-cost pacages. You can even mount a variety of sizes as wel as functions on one manifold. With a wide choice of functions, voltages and options, these solenoid and remote pilot operated vavles are ideal for packaging assembly and factory floor automation applications.

• 4-way, 2 & 3 position, double 3/2
• M5 thru 3/8" ports
• Inline, subbase & manifold mounted
• Solenoid or air pilot operated

"42" Series -

Single piece spool with molded Buna N seals for long' trouble-free life. Unique solenoid design minimizes coil burnout. Also available in stack mounted configuration.

• 4-way, 5-port, 2 & 3 position
• 1/4 and 3/8" ports
• Inline mounted
• Solenoid or air pilot operated

PVLB10 Series -

The PVLB10 Series modular stacking system has two forms of collective wiring (25 or 35 pin) which communicate to the valves via interconnect boards. The no-wire stack system facilitates "plug & play" design. Feedback and output modules can be combined into the valve stack to further enhance the valves' adaptability into machine systems. Stacks are designed for mounting onto 35mm DIN rail.

• 4-way, 5-port, 2-position
• 1/8 and 1/4 inch ports
• Stacking
• Solenoid operated

PVL Series -

The PVL Series family of compact valves are designed for mounting to 35mm DIN rails. Easy in, easy out stack assembly speeds installation and makes future configuration changes or service fast and simple. Output ports available either threaded or with instant tube fittings. Thin valve cross sections allow for more valve outputs in a smaller package. Also available in inline version.

• 4-way, 5-port, 2-position
• M5 and 1/8 thru 3/8 inch ports
• Stacking (stacks may be DIN rail mounted)
• Solenoid and remote pilot operated

"F" Series -

Plug-in style mounting simplifies installation and reduces downtime. F Series valves utilize Parker's WCS (Wear Compensation System). WCS offers a wear compensated sealing system for non-lube service through millions of cycles. Encapsulated, low-watt (1.8W) coils provide maximum life, even under continuous duty service. Sandwich regulators, pressure select regulators and sandwich flow controls promote flexible designs in single manifold packages. Maniflod offer 25-pin Sub-D for a completely wireless system.

• 4-way, 2 & 3 position
• 1/8 thru 3/8 inch ports
• Plug-in subbase or manifold mounted
• Solenoid or air pilot operated

H Series - ISO Interchange Valves -

ISO valve patterns are globally interchangeable between manufacturers. Designed for non-lube service for millions of trouble-free cycles. A full complement of sandwich regulators and flow controls add to the flexibility of the H Series. ISO 5599/1 includes 22mm and 30mm CNOMO solenoid pilots, as well as NEMA 4 "Automotive" style mini and micro connectors. ISO 5599/2 valves have body to base plugs which high wiring and make valve replacement fast and easy.

• 4-way, 2 & 3-position
• Conforms to ISO 5599/1 and 5599/2
• ISO sizes 1, 2, 3, & 4
• Subbase and manifold mounted
• Solenoid and air operated
• Cv=1.2 to 7.3

"N" Series -

Compact inline design in three body sizes features a short stroke poppet for fast, consistent response. Pre-lubed for non-lube service. Suitable for low pressure and vacuum service with external pilot. Special service pilots available for applications requiring continuous duty operation.

• 2 & 3-way
• 1/4 thru 1 1/2 inch ports
• Inline mounted
• Solenoid or remote air pilot operated

Lockout Valves
[Top of Page]

LV Series

Rugged cast aluminum alloy construction with metal handle for durability. Bright color for high visibilty. Optional exhaust silencer available. Complies with O.S.H.A. Standard 29 CFR Part 1910.

• 3-way operation
• 1/4 to 1 inch ports
• Inline or surface mounted
• Locking hasp for padlock

Ball & Plug Valves
[Top of Page]

Ball Valves- provide positive stop action for full shut-off. Parker's ball valve bodies are machined from high quality CA 377 forgings. Highly inert PTFE seats and seals resist chemical corrosion. These valves provide extended service life and resist failure caused by severe temperature applications.

• Vented and Padlocking Handle Ball Valve Available
• Sizes: 1/4 thru 2 inch

Plug Valves- have a compact design featuring nitrile seals and a one-piece extruded brass body, offering campatibility with a wide range of materials. Parker valves feature 1/4 turn shutoff for ease of operation. All plug valves are 100% leak tested and are certified to be leak free to one SCCM.

• Male Pipe to Male Pipe, Female Pipe to Male Pipe, Female Pipe to Female Pipe Connections.
• Sizes: 1/8 and 1/4 inch

Serial Interface
[Top of Page]

Serial Addressable Module
Generation 2.1 -

Serial Addressable Modules (SAM) allow banks of pneumatic directional control valves to be driven from a PC or programmable logic controller. Serial communication reduces wiring and installation costs for materials and labor. Communication, status and I/O LED’s simplify troubleshooting. A switched output power option allows outputs to be controlled by an emergency stop circuit without disabling the communications module. The Serial Addressable Modules feature rugged construction to withstand hostile plant environments. A unit consists of a communications module and input and/or output modules. The SAM is compatible with Parker AL, F3, A4, A6, ISO, and B Series Valves.

• "Plug & Play" communication
• Maximum 32 inputs and 32 outputs
• Stand alone or with valve manifold
• Compatible with DeviceNet™, Allen-Bradley Remote I/O, Honeywell's Smart Distributed System™, Interbus-S and Profibus DP

Serial Addressable Module-
Generation 3.0

SAM Generation 3.0 modules are designed for simplicity and power. Typical applications include areas of control requiring one to four valves with sensor feedback needs located a distance from the central control panel. SAM Generation 3.0 allows users to wire up to 4 external inputs (such as actuator proximity switches) back to the valve. Perfect for applications where space is a premium, the SAM 3.0 package takes up only slightly more space than the standard valve/base assembly it is attached to. Available on valves ranging from 0.6 to 13 Cv and ports from 1/8" to 1 1/4"

• Self-fontained valve module with inputs
• Designed for one to four valves
• Maximum four solenoids and 4 external inputs
• Compatible with DeviceNet™

Flow Controls & Accessories
[Top of Page]

• Flow Control Valves
• Micrometer Flow Control Valves
• Right Angle Flow Control Valves
• Needle and Check Valves
• Shuttle Valves
• Quick Exhaust Valves
• Relief Valves
• Speed Controls

INSTRUMENTATION VALVES

Instrumentation Ball Valves-
[Top of Page]

Actuation: Manual, Electric or Pneumatic

Provide positive shut-off for liquids and gasses up to 6000 psi @ 70°F. Choose Parker Ball Valves where full flow is required in process, power, and instrumentation applications.

Features:

• Available in 316 SS, brass
• Pressure to 6000 psi @ 70°F in 316 SS, or 3000 psi @ 70°F in brass
• C_v=.16 to 6.0
• Temperature ranges: -65°F to 350°F
• True "Floating" Ball Valve design is seat wear compensating
• Micro finished ball for positive shut-off.

Features:

• One piece seat/packing design (Patent Pending)
• Wide variety of ports: inch and metric
• Panel mountable to 1/4" thickness
• One piece stem/ball
• Handle indicates direction of flow
• Positive handle stops
• Full operating pressure at any port
• Color coded handles

Specifications:

• Pressure rating: 3000 psig (207 bar), CWP (20.6 MPa)
• Temperature rating: -65° F to 350° F (-54° C to 177° C)
• Orifice: .093 to .187
• C_v: .16 to .45
• Body materials: Stainless Steel and Brass
• Body configurations: 2-way and 3-way

Butterfly Valves
[Top of Page]

Configurations include; 1, 2, and 3 piece construction…threaded, soldered, flanged, & socket welded ends constructed in bronze, carbon steel, and stainless steel material.

Rotary Plug Valves
[Top of Page]

Compact quarter-turn valves are manufactured from stainless steel or brass bar stock and offered in a variety of port connections. The straight-thru design provides minimum pressure drop.

Sample Cylinders
[Top of Page]

Parker sample cylinders permit samples to be drawn from remote processes and provide safe containment during transfer to the laboratory for analysis.

Needle Valves
[Top of Page]

Parker General Purpose- needle valves, forged and bar stock bodies, provide flexibility when designing miniaturized tubing or piping systems up to ½". Available with port connections. Tube (CPI or A-lok), NPT male or female, ABW or Weld-lok. Color coded handles for valves where applicable. Applications for general purpose shut-off, coarse regulation, and severe service.

Barstock Needle Valves- are compact design for direct mounting onto sample cylinders. All metal R stem or soft Kel-F^® stem tips. 316 SS T-Bar handles and round anodized aluminum handles available.

Rising Stem Plug Valves -are designed for longer service life in severe applications such as corrosives, slurries, steam, and particulated medias.

Precision Metering Valves
[Top of Page]

The RG Group offers a broad line of precision metering valves for use in analytical instrumentation, research laboratories and other applications. The valves are designed to provide accurate and stable control of low gas and liquid flow rates. A variety of connection sizes, body patterns, and materials of construction provide considerable application versatility.

Adjustable Relief Valves
[Top of Page]

RG offers two models of Adjustable Relief Valves, both are externally adjustable, one has additional manual override for immediate release of pressure.

Check Valves
[Top of Page]

Provide unidirectional control of liquids and gases and are offered in numerous sizes and variety of inch/metric port connections, including CPI™ and A-LOK™ compression and male and female NPT.

Solenoid Valves
[Top of Page]

Two, three, and Four way designs. 1/8" to 2" size, vacuum to 3000 psi, full line of intrinsically safe products, miniature & microminiature solenoid valves.

Ultra High Purity Valves
[Top of Page]

features:

• Low internal volume
• Class 100 cleaning available
• Color coded handles
• Special Elgiloy diaphragms provide superior cycle life
• Guide bearing aligns stem to ensure repetitive shut-off
• 100% helium leak tested to 4 x 10^-9 cc/sec. (across the seat & inboard)

features:

• Standard material: 316 SS
• Choice of Port Connections
• Choice of Stem Tips
• Color coded handles for manual & toggle valves
• Electrical & mechanical indicator switches for air operated normally closed valves
• Optional Class 100 cleaning, assembly, testing and packaging.

Bulk Gas Systems Valves
[Top of Page]

features:

• Straight through bore provides maximum flow with minimal turbulence
• 316L Stainless Steel VIM/VAR or AOD/VAR body material minimizes sulfur and reduces impurities that cause surface anomalies
• Stainless Steel packless bellows design for critical application
• Replaceable nickel gasket for atmospheric seal
• UHP electropolished finishes available at 5, 7, 10 and GP finishes at 20 Ra
• Color-coded handles available.