Ball Valves

Carbon Steel Ball Valves - high quality carbon steel {Carbon Steel} valves with corrosion-resistant coating for reliable, economical shutoff on general industrial and hydraulic lines. Sizes: 1/4" & 3/8" (full port), 1/2" - 2" (standard port). Working pressure: to 2000 PSI (1/4" - 1"), to 1500 PSI ( 1 1/4" - 2"), to 150 PSI saturated steam.

Stainless Steel Ball Valves - valves are {Stainless Steel} manufactured from CF-8M stainless steel, the cast equivalent of 316 stainless steel. Full flow design and reinforced PTFE seats and seals assures maximum efficiency and reliability. Sizes: 3/4" - 2" (Panel Mount Style Standard on 1/4" - 1/2" sizes). Working pressure: to 2000 PSI (3/4" - 1"), to 1500 PSI (1 1/4" - 2"), to 150 PSI saturated steam.

Brass Ball Valves - brass valves engineered for {Brass} extended service life. Highly inert PTFE seats and seals provide resistance to chemical corrosion. Sizes: 1/4" - 2". Working pressure: 29in. Hg Vacuum to 600 PSI (Vented, 250 PSI), 150 PSI saturated steam.

Mini Ball Valves- Economical {Mini} chrome plated brass valves designed for use in confined or hard-to-reach applications. Available in two different working pressures. All Mini Ball Valves are available with optional long handles. Sizes: 1/8" - 1/2". Working pressure: to 450 PSI.

Panel Mount Ball Valves - Most standard {Panel Mount} female/female Parker Ball Valves are available as Panel Mount Ball Valves with the same working pressure and temperature ratings and handle options. Sizes: 1/4" to 1" in brass and 1/4" to 1/2" in stainless steel.

Male/Female Ball Valves- high quality forged brass {Male/Female} valves with male/female pipe threads, highly inert PTFE seats and seals, optimum flow design and blowout proof stem. Sizes: 1/4" to 1". Working pressure: 29in. Hg Vacuum to 600 PSI (Vented, 250 PSI), to 150 PSI saturated steam.

Straight Thread O-Ring Ball Valves- high quality {Straight Thread} forged brass valves with male/female straight threads and nitrile O-ring, highly inert PTFE seats and seals, optimum flow design and blow-out proof stem. Sizes: 1/4" to 1". Working pressure: 29in. Hg Vacuum to 600 PSI (Vented, 250 PSI), to 150 PSI saturated steam.

Solder End Ball Valves- high {Solder End} quality forged brass valves designed to be soft soldered into water lines without disassembly. This allows installation without disturbing the seats and seals. Sizes: 1/2" to 2". Working pressure: to 600 PSI (150 PSI saturated steam).

Locking Handle Ball Valves-A {Locking Handle} level handle locking option is available on most standard Parker Ball Valves. Brass ball valves also are offered with a vented option for pressure relief to meet OSHA Standard 29CFR part 1910.

[Top of Page]