Tube Fittings
and Fabrication Equipment

Forged for strength and durability, Parker tube fittings and adapters include the Triple-Lok^® 37° flared fitting, Ferulok^® flareless fitting, Intrulok^® brass flareless fitting, EO^® metric flareless fitting, Seal-Lok^® O-ring face seal fitting, pipe adapters and JIS fittings. Made from steel, stainless steel, and brass in inch and metric sizes with pressures to 9000 psi and beyond. Tube fabrication and flanging equipment available.

SAE/NPT TUBE FITTINGS
[Top of Page]

O-Ring Face Seal Fittings (Seal-Lok^®)
- sizes 1/4" thru 2". Materials: steel & stainless steel. Pressures: up to 9,000 psi.

37º Flared Fittings (Triple-Lok^®) -
sizes 1/8" thru 2". Materials: steel, stainless steel, and brass. Pressures: 3000 psi average.

Flareless Bite Type (Intrulok^®) -
sizes 1/8" thru 2". Materials: brass.
Pressures: 1500 psi average.

Flareless Bite Type (Ferulok^®) - sizes 1/8" thru 2". Materials: steel,
stainless steel. Pressures: 3000 psi average.

Pipe Fittings - sizes 1/16" thru 2". Materials: steel, stainless steel, and brass. Pressures: up to 10,000 psi.

Tube Clamps (Parklamp^®) - sizes 1/4" thru 2". Materials: polypropylene. Pressures: up to 6,000 psi.

Swivel Adapters - sizes 1/8" thru 2". Materials: steel. Pressures: 3000 psi average.

Flange Adapters- sizes 3/4" thru 2". Materials: steel. Pressures: up to 8,000 psi.

Bleed Adapters- sizes 1/4" thru 1 1/2". Materials: steel. Pressures: up to 6,000 psi.

METRIC TUBE FITTINGS
[Top of Page]

Metric Flareless Bite Type EO^® - Ermeto - sizes 4mm thru 42mm. Materials: steel, stainless steel, and brass. Pressures: up to 9000 psi.

Metric Flareless Bite Type EO-2^® - Ermeto (soft seal) - sizes 4mm thru 42mm. Materials: steel, stainless steel, and brass. Pressures: up to 9200 psi.

Metric O-Ring Face Seal (Metric Seal-Lok^®) - sizes: 6mm thru 38mm. Materials: steel. Pressures: up to 9200 psi.

Metric 37 Flared Fittings (Metric Triple-Lok^®) - sizes: 6mm thru 38mm, Materials: steel. Pressures: 3000 psi average.

Japanese Industrial Standard (JIS) - sizes: 1/4" thru 1". Materials: steel. Pressures: 3000 psi average.

Metric Check Valves - sizes: 10mm thru 42mm. Materials: steel. Pressures: up to 6000 psi.

Metric Tube Clamps - sizes: 6mm thru 42mm. Materials: Polypropylene. Pressures: up to 9000 psi.

TUBE FABRICATION & EQUIPMENT
[Top of Page]

Port Tooling - high speed tool steel for tapping and counterboring ports. sizes: SAE: 1/8" thru 2", Metric: 12mm thru 42mm.

{hose clamps}

Hose Clamps - sizes: 1/4" thru 2". Materials: Polypropylene. Pressures: up to 6000 psi.

Hand Tools - various tools for cutting, deburring, and properly preparing tubing for assembly to fittings. Sizes: 1/8" thru 2".

Exactol^® Crank Benders - for bending steel or stainless steel tubing. Sizes: 1/4" thru 1 1/2".

Hand Benders - for bending copper, aluminum, steel, or stainless steel tubing. Sizes: 1/8" thru 1".

Hydraulic Tube Bender (HB 632) - operates hydraulically and bends steel and stainless steel tubing from 3/8" thru 2" with metric sizes available.

Presetting Tool (Hyferset^®) - presets both inch or metric ferrules on steel or stainless steel tubing from 1/4" thru 2" or 6mm thru 42mm.

Hydraulic Flaring & Presetting
(Hydra-Tool^®) - used for flaring tubing to 37° for use with Parker Triple-Lok^® or presetting ferrules for Parker Ferulok^® fittings.

Flanging Machines -

Parflange 1025^® - bench top flanging machine used to flange or flare both inch and metric tubing for use with Parker Seal-Lok^® or Parker Triple-Lok^® fittings.

TP1025^®- performs four functions: cuts, deburrs, flares, and flanges. Mounted with Parflange 1025.

1040 - used for flanging or flaring inch and metric tubing for use with Parker Seal-Lok^® or Triple-Lok^® fittings.

NON-STANDARD FITTINGS
[Top of Page]

Parker Tube Fittings Division has a dedicated facility to manufacture all your "non-standard" fittings. They have the ability to manufacturer sizes from 1/16" thru 3" in any material.

[Top of Page]