PARKER IQ-200 LASER
FLUID CONDITION MONITOR
Real Time Fluid Analysis Any Time - Anywhere!
- Parker's IQ-200 On-Line Particle
Counter provides real time fluid analysis in a compact affordable
package
- Know your fluid cleanliness at all
times for predictive maintenance, quality control and zero downtime
- Remote and multiple fluid system
monitoring can be accomplished from a single convenient location with RS232/485
serial port connection
|
 |
- Simplified programmable software
settings for sampling intervals from <5 seconds to 1 minute or longer
- Adjustable alarms for fluid
cleanliness changes alerts operator of fluid condition
- Particle count reporting data in 6
channesl including ISO and NAS format
|
PARKER HB SERIES BALL
VALVE
 |
Parker High Pressure HB4 Series Ball Valves, featuring
Suparcase™ treated ball and trunnions, provide reliable shut-off or
switching functions. The treated trunnion style ball enhances the resistance of
the trunnions against seizure and the resistance of the spherical ball to
particle abrasion.
|
The compact and rugged design
employs spring-loaded seats for high cycle life and low operating torques at
pressures up to 10,000 psig (689 bar).
C Series
PARKER CHECK VALVES
Parker C Series Check Valves are
designed for uni-directional flow control of fluids and gases in industries
such as chemical processing, oil and gas production and transmission,
pharmaceutical, pulp and paper, power and utilities.
- Resilient, custom molded, blow-out resistant
seat design
- Back stopped poppet minimizes spring
stress
- 100% factory tested for both crack and
reseat
- Cracking pressures include: 1/3, 1, 5, 10,
25, 50, 75 and 100 psi
- Port connections include male and female
NPT, CPI™, A-LOK®, UltraSeal, VacuSeal, BSP, SAE, and
Seal-Lok
|
 |
 |
Parker
Stainless Steel
SWING-OUT
BALL VALVES
Parker's Cast Body is manufactured
from CF-8M Stainless Steel, the cast equivalent of 316 Stainless Steel.
|
This ball valve is ideal for
corrosive environments such as chemical plants and refineries. The full flow
design assures maximum operating efficiency. The reinforced PTFE seats and
seals, coupled with the 316 Stainless Ball and blow-out proof stem, result in
the utmost reliability. This ball valve is available in 1/4" through
2" female pipes sizes. Direct access for cleaning or maintenance is
performed by removing one bolt, loosening the other three bolts, and swinging
out the center section. Seats and seals can then be replaced without disturbing
pipe alignment.
PARKER RH4 SERIES RELIEF
VALVES
Parker RH4 Relief Valves are designed such that when the
upstream pressure exceeds the closing force exerted by the spring, the lower
stem opens, permitting flow through the valve. Flow through the valve increases
proportionately to the increase in upstream pressure.
Pressure settings are externally adjustable
while the valve is in operation. Eight different spring ranges provide greater
system sensitivity and enhanced performance.
|
 |
|
