Air Preparation Products
FILTERS, REGULATORS
and LUBRICATORS
[Top of Page]
 Parker FRLs offer rugged performance and dependable
service in a wide variety of sizes and flows. Available with polycarbonate or
metal bowls. Operating pressures to 250 PSIG. The 06 and 07 Series (3/8"
and ½" basic bodies) feature modular mounting and a variety of
accessories.
- Particulate Filters ( 1/8" thru 2)
- Coalescing Filters (1/8" to 3")
- Regulators (1/8" thru 2")
- Pilot Controlled Regulators (1/4" thru
1 ½")
- Filter/Regulators (1/8"
thru ¾")
- Micro-Mist Lubricators (1/4" thru 1
½")
- Mist Lubricators (1/8" thru
2")
AIR DRYERS
[Top of Page]
 The RTI Eliminizer®
point-of-use dryer/ filter prevents the migration of water and dirt into
critical applications. The Eliminizer point of use dryer incorporates patented
inverse flow technology and is engineered specifically to remove condensed
liquids and dirt greater than 1.0 micron. This dryer utilizes a stainless steel
and cotton element to solve the majority of application problems, and is most
effective when installed as close as possible to the application. The result
when installed will produce clean, dry air at the point-of-use. The Eliminizer
is available with poly or metal bowls in pipe sizes from ¼" up to
1" and can handle flows to 150 SCFM.
COLD AIR GUNS
[Top of Page]
Cold Air Guns incorporate a vortex tube
in a system designed to fit the needs of many common vortex tube
applications.
Features:
- Cool without refrigerants (CFCs/HCFCs) or
moving parts for reliable, trouble-free operation.
- Use no electricity - intrinsically safe, no
RF interference.
- Include an integral muffler for quiet
operation - within OSHA noise specifications
- Are powered by filtered compressed
air.
VORTEX COOLER™™™™
ENCLOSURE COOLERS
[Top of Page]
ITM Vortec’s Vortex Coolerä Coolers are the low-maintenance
alternative for keeping enclosures cool and clean - without Freon or other
refrigerants.
Features:
- Eliminate downtime caused by dirty,
overheated controls
- Replace hot, dirty air in the enclosure with
cool, clean air
- May be thermostatically-controlled to
operate only when necessary to save energy
- Use a vortex tube to generate cold air
without Freon or other refrigerants
- Compact size, easy to install
- Exceptionally reliable, no
moving parts to break
- Maintenance-free, no compressors or filters
to clean
- Cooling capacities up to
5000 BTUH (1250 kcal/H).
|
