Innovative Motion Control and Fluid Handling Products and Solutions

Click Image to Zoom
2B4S15L2 Autoclave Engineers 2-Way Ball Valve - 2B42B4S15L2 Autoclave Engineers 2-Way Ball Valve - 2B4
*ACTUAL PRODUCT MAY DIFFER FROM IMAGE SHOWN. IT IS BUYERS RESPONSIBILITY TO VERIFY ACTUAL PRODUCT SPECIFICATION MEETS INTENDED REQUIREMENTS BY REVIEWING ITEM SPECIFICATIONS AND RELATED DOCUMENTATION LISTED BELOW.

2B4S15L2

Autoclave Engineers 2-Way Ball Valve - 2B4

Parker Autoclave Engineers 2-Way Ball Valve - 2B4

Manufacturer Parker
Part Number 2B4S15L2
Availability Out of Stock Call to order
UOM EA

Description:
Ball Valve Features: • One-piece, trunnion mounted style, stem design eliminates shear failure and reduces the effects of side loading found in two piece designs. • Re-torqueable seat glands for longer seat life. • PEEK seats offer excellent resistance to chemicals, heat, and wear/abrasion. • Full-port flow path minimizes pressure drop. • 316 cold worked stainless steel construction. • Low friction pressure assisted graphite filled PTFE stem seal increases cycle life and reduces operating torque. • Quarter turn from open to close with positive stop. • Viton o-rings for operation from 0°F (-17.8°C) to 400°F (204°C). • Optional o-rings available for high-temperature applications. • Optional wetted materials. • Wide selection of tube and pipe end fittings available. • Electric and pneumatic actuator options.
Email this page to a friend


Product Attributes


UOM:
EA
Connection Type:
W125
Orifice size:
0.250 Inch (6.35mm)
Minimum Orifice size:
0.094 Inch (2.39mm)
End Connection Code:
L2
Seat Gland Hex:
1.00 Inch (25.40mm)
Material:
316 Stainless steel
Trade Name:
Speedbite
Valve Type:
Ball Valve
Series:
2B
Flow Configuration Type:
Two-way shut off
Configuration Type:
2-way
Inch/Metric:
Inch
CV Factor:
1.51
Operator Type:
Manual
Material - Seats:
PEEK
Stem Seal:
PTFE
Parker Division:
Autoclave Engineers
Material - Seals:
Fluorocarbon rubber
Parker Group:
Instrumentation
Stem type:
Trunnion mounted - 1 piece
Operating Temperature:
0 F to 400 F (-17.8 C to 204 C)
Pressure Rating:
15,000 psi (1034 bar) MAWP
Application:
Laboratories, test stands, control panels, chemical research, pilot plants, water blast pumping units, and high volume chemical injection skids.

Safety Notice

WARNING: Products containing brass have a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.


Part Number Tags: 2B4S15L2

Product Resources:
Updating...