Click Image to Zoom
2B6S15P8-HT Autoclave Engineers 2-Way Ball Valve - 2B62B6S15P8-HT Autoclave Engineers 2-Way Ball Valve - 2B6
*ACTUAL PRODUCT MAY DIFFER FROM IMAGE SHOWN. IT IS BUYERS RESPONSIBILITY TO VERIFY ACTUAL PRODUCT SPECIFICATION MEETS INTENDED REQUIREMENTS BY REVIEWING ITEM SPECIFICATIONS AND RELATED DOCUMENTATION LISTED BELOW.

2B6S15P8-HT

Autoclave Engineers 2-Way Ball Valve - 2B6

Parker Autoclave Engineers 2-Way Ball Valve - 2B6

Manufacturer Parker
Part Number 2B6S15P8-HT
Availability Out of Stock Call to order
UOM EA

Description:
Ball Valve Features: • One-piece, trunnion mounted style, stem design eliminates shear failure and reduces the effects of side loading found in two piece designs. • Re-torqueable seat glands for longer seat life. • PEEK seats offer excellent resistance to chemicals, heat, and wear/abrasion. • Full-port flow path minimizes pressure drop. • 316 cold worked stainless steel construction. • Low friction pressure assisted graphite filled PTFE stem seal increases cycle life and reduces operating torque. • Quarter turn from open to close with positive stop. • Viton o-rings for operation from 0°F (-17.8°C) to 400°F (204°C). • Optional o-rings available for high-temperature applications. • Optional wetted materials. • Wide selection of tube and pipe end fittings available. • Electric and pneumatic actuator options.
Email this page to a friend


Product Attributes


UOM:
EA
Connection Type:
1/2 Inch NPT
Orifice size:
0.375 Inch (9.52mm)
Minimum Orifice size:
0.375 Inch (9.52mm)
End Connection Code:
P8
Seat Gland Hex:
1.38 Inch (35.05mm)
Material:
316 Stainless steel
Country of Origin (COO):
Special request, please call for COO
Harmonized Tariff (HTS):
Special request, please call for HTS
Valve Type:
Ball Valve
Series:
2B
Flow Configuration Type:
Two-way shut off
Configuration Type:
2-way
Inch/Metric:
Inch
CV Factor:
3.51
Operator Type:
Manual
Material - Seats:
PEEK
Stem Seal:
PTFE
Parker Division:
Autoclave Engineers
Parker Group:
Instrumentation
Stem type:
Trunnion mounted - 1 piece
Pressure Rating:
15,000 psi (1034 bar) MAWP
Material - Seals:
Kalrez
Operating Temperature:
0 F to 500 F (-17.8 C to 260 C)
Application:
Laboratories, test stands, control panels, chemical research, pilot plants, water blast pumping units, and high volume chemical injection skids.

Safety Notice

WARNING: Products containing brass have a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.


Part Number Tags: 2B6S15P8HT

Product Resources
Updating...