Description: |
Parker Racor EACP Series Composite Dynamic Air Pre-Cleaners separate solid dust and debris from the air stream before they reach the main air cleaner. They are installed in place of the rain cap, dust bowl, or aspirated pre-cleaner (exhaust system). In some applications, they can be mounted directly to the air cleaner. Air enters through static vanes at the bottom periphery of the pre-cleaner causing the air to spin and drive a high velocity rotor, which in turn acts as a blower that centrifugally forces dust, dirt, insects, water, and snow through a discharge port. Pre-cleaned air then flows through the outlet to the main air cleaner system and extend the life of the primary air filter from 5 to over 12 times, greatly increasing the air cleaner service interval, reducing operating cost, and increasing equipment uptime. Racor Composite Pre-cleaners range in size to fit intakes from 1 1/2” to 6” diameter to handle air flows from 3 to 1100 cfm. They have been independently tested and proven superior. Racor Composite Pre-cleaners are constructed with specially formulated materials to withstand heat, cold, vibration, UV Radiation, and impact. This series of pre-cleaners are light weight, durable, high efficiency, supplied with sealed bearings, also rust and corrosion resistant too. No maintenance required and have a limited lifetime warranty*.
|