Account Cart

Loading Mini-cart...

Refine
FILTERSClear All
Department: BrandsX
Product Type: ParkerX
Product Sub-Type: Autoclave Engineers - Instrumentation Products DivisionX
Product Type: ValvesX
Product Sub-Type: Ball ValvesX

Trade Name

Slimline (25) Speedbite (14)

Valve Type

Accessories (1) Ball Valve (25) Ball Valve - Sour Service (1) Ball Valve Actuator (12) Ball Valve with Actuator (9) Replacement parts (23)

Series

S2B (10) S3B (6) S3BD (6) 2B (18) 3B (7) 3BD (12) 4B (2) 4BS (1) 6DB (1) 2B, 6DB (1)

Accessory type

Lock-out device (1)

Configuration Type

2-way (28) 3-way (13) 3-way diverter (18) 4-way crossover (2) 4-way switching (1) Double block and bleed (1)

Flow Configuration Type

90° turn (8) 90° turn crossover (4) 90° turn open/close (1) 180° turn switching (7) Two-way shut off (6)

End Connection Code

H4 (6) H6 (6) H9 (4) L2 (4) L4 (4) L6 (4) L8 (14) M4 (8) M6 (15) M9 (14) M12 (16) M16 (9) M24 (2) P2 (4) P4 (14) P6 (15) P8 (15) P12 (9) P16 (10) S16 (1)

Connection Type

1/8 Inch NPT (10) 3/16 Inch (1) 1/4 Inch (1) 1/4 Inch NPT (16) 3/8 Inch (1) 3/8 Inch NPT (15) 1/2 Inch (1) 1/2 Inch NPT (15) 3/4 Inch NPT (9) 1 Inch NPT (9) 1 Inch NPT Female (1) 1 Inch SAE Female (1) F250C (6) F375C (6) F562C (4) SF250CX20 (8) SF375CX20 (15) SF562CX20 (14) SF750CX20 (16) SF1000CX10 (1) SF1000CX20 (8) SF1500CX (1) SM1500CX10 Male (1) SW250 (4) SW375 (4) SW500 (14) W125 (4)

Minimum Orifice size

0.094 Inch (2.39mm) (6) 0.109 Inch (2.77mm) (6) 0.125 Inch (3.17mm) (4) 0.128 Inch (3.25mm) (4) 0.188 Inch (4.77mm) (6) 0.203 Inch (5.16mm) (11) 0.250 Inch (6.35mm) (2) 0.312 Inch (7.92mm) (9) 0.328 Inch (8.33mm) (6) 0.375 Inch (9.52mm) (5) 0.500 Inch (12.70mm) (6) 0.516 Inch (13.10mm) (1) 0.668 Inch (17.48mm) (1) 0.688 Inch (17.48mm) (1) 0.750 Inch (19.05mm) (2) 0.938 Inch (23.83mm) (2) 1.00 Inch (25.40mm) (2) 1.25 Inch (3.17mm) (2)

Vent Connection Code

M4 (1) P4 (1)

Vent Connection

1/4" NPT (1) SF250CX20 (1)

CV Factor

0.5 (4) 1.51 (2) 2.1 (4) 2.3 (1) 2.5 (2) 3.51 (3) 4.4 (4) 10.2 (2) 21 (2) 30 (2) 34 (2)

Operator Type

Electric (10) Manual (26) Pneumatic - air to close/spring to open (9) Pneumatic - air to open/air to close (double acting) (12) Pneumatic - air to open/spring to close (13)

Material

Aluminum (12) 316 Stainless steel (26)

Material - Seats

PEEK (26)

External Pressure (Max)

4,500 psi (310 bar) (2) 5,000 psi (345 bar) (8) 5,500 psi (379 bar) (1)

Lock-out device

Installed (4)

Material - Seals

Ethylene propylene rubber (5) Fluorocarbon rubber (15) Kalrez (6) Nitrile rubber (11)

Operating Temperature

-65 F to 300 F (-54 C to 149 C) (5) 0 F to 160 F (-17 C to 71 C) (10) 0 F to 175 F (-17 C to 79 C) (14) 0 F to 400 F (-17.8 C to 204 C) (15) 0 F to 500 F (-17.8 C to 260 C) (6) 250 F (121 C) MAX (11)

Operating voltage

120 VAC 50/60 hz (8) 220 VAC 50/60 hz (3) 240 VAC 50/60 hz (4) 24 VDC (9)

Orifice size

0.188 Inch (4.8mm) (11) 0.250 Inch (6.4mm) (7) 0.328 Inch (8.33mm) (11) 0.375 Inch (9.52mm) (12) 0.500 Inch (12.70mm) (17) 0.750 Inch (19.05mm) (4) 1.00 Inch (25.40mm) (4)

Pressure Rating

80 psi (5.51 bar) min / 150 psi (10.34 bar) max (14) 10,000 psi (690 bar) MAWP (24) 15,000 psi (1034 bar) MAWP (15) 20,000 psi (1379 bar) MAWP (7)

Seat Gland Hex

1.00 Inch (25.40mm) (6) 1.38 Inch (35.05mm) (14) 1.75 Inch (44.5mm) (7) 1.88 Inch (47.8mm) (4)

Stem Seal

PTFE (26)

Stem type

Trunnion mounted - 1 piece (26)

Water Depth (Max)

10,300 ft (3140m) (2) 11,500 ft (3505m) (8) 12,500 ft (3810m) (1)

Replacement Part

Repair kit (23)
Brands » Parker » Autoclave Engineers - Instrumentation Products Division » Valves » Ball Valves

Parker Autoclave Engineers manufactures high-pressure ball valves with a wide variety of tube and pipe end connections. Made of cold-worked stainless steel, they have exceptional chemical, wear and heat resistance. You'll find 2, 3 and 4-way ball valves, electric and pneumatic-operated ball valve actuators and the repair kits you need to keep your job on track.

Showing 1 - 21 of 62
123Next >Last >>

Showing 1 - 21 of 62
123Next >Last >>
Updating...